banner

99.99% (4N) Alpha Nano Alumina Powder for Ceramics

1. Purity: 99.99%
2. Specific surface area: 5–10 m²/g
3. Crystal form: α-phase
4. Particle size: 150–300 nm
5. Product applications: Ceramics, plastics, rubber
Send Inquiry Download
  • Product Description

99.99% (4N) Alpha Nano Alumina Powder for Ceramics, Plastics and Rubber

Start with our 99.99% (4N) Alpha Nano Alumina Powder for Ceramics, a -phase powder with 150–300 nm particle size and 5–10 m2/g specific surface area, for ceramic bodies and filled polymer compounds that call for a clean, fine powder. In ceramics it is a sintering aid and toughening phase. In polymers and rubber it is a thermal and wear resistant filler. Xi'an PUTAI Environmental Protection Co., Ltd. provides powder for those customers who need to check purity, crystal form and particle size against a formulation sheet before purchase.

99.99% (4N) Alpha Nano Alumina Powder for Ceramics Specifications

The values below are the supplied specifications for products. Check them against your formulation sheet before sending an inquiry.

ParameterSpecification
ProductAlpha Nano Alumina Powder
Purity99.99% (4N)
Crystal formα-phase
Particle size150–300 nm
Specific surface area5–10 m²/g

 

ModelAppearanceCrystallinePartical size (nm)Purity (%)

Specific area

(m2/g)

Application

YW-L150

white powderα-phase

150nm

99.99

5-10

ceremics, plastic, rubber

YW-L200

white powderα-phase

200nm

99.99

5-10ceremics, plastic, rubber

YW-L300

white powderα-phase300nm99.995-10ceremics, plastic, rubber

Other data, such as bulk density, impurity limits, moisture content, packaging and MOQ, is not included in the supplied specifications, so it is not listed here. Please contact our team to confirm any value you need.

Sintering Aid and Toughening Phase in Ceramics

99.99% (4N) Alpha Nano Alumina Powder for Ceramics is used as a sintering aid. It fills the spaces between micron-sized particles and fewer pores remain in the body before fire. It is a toughening step to increase the mechanical performance of the final component.

The proper amount of addition varies on your body and firing pattern, thus tiny experimental batches are the practical method to find out.

Particle Size and Surface Area in Practice

The interval of 150–300 nm lies between traditional micron-size fillers and particles of just a few dozen nanometres. It disperses better than micron fillers and binds more strongly to the matrix. Higher loading may be achieved more readily without a considerable increase in viscosity as compared to extremely small particles.

The particular surface area of 5 - 10 m2/g makes contact area available for matrix bonding and maintains the powder controllable during mixing. Before scale-up, verify both values against your process window.

Applications

Ceramics

Used as a sintering aid to reduce pore gaps and as a toughening phase to improve mechanical performance, especially when density and strength are important.

Plastics

Acts as a filler that balances heat conductivity and wear resistance. Its particle size also provides for easier loading than tens-of-nanometer particles, however viscosity should be monitored as loading rises.

Rubber

Reinforces the compound, conducts heat and increases wear resistance. Used as a filler in thermally conductive rubber.

Formulation and Handling Notes

These are broad recommendations. Just test them in your own experiments.

  • Add the powder gradually, not all at once.
  • Disperse using high shear (for example, bead mill or ultrasonic unit) to break up clusters.
  • Begin with tiny experimental lots and then optimise the loading to get the desired attribute, whether it be sintered density, thermal performance or wear resistance.
  • Plastics and rubber compounds – watch the viscosity as the loading goes up.
  • Fine granules may irritate the respiratory tract. Use dust mask, local exhaust ventilation.
  • Keep packets unopened and keep them dry.

Before You Order

When you send inquiry to 99.99% (4N) Alpha Nano Alumina Powder for Ceramics, please include:

  • Your final use: rubber, plastics or ceramics
  • Anticipated volume
  • Surface Area, Purity and Target Particle Size
  • Any packing, transportation or paperwork needs

Our experts will advise you on which of these data may be verified for your purchase.

About Xi'an PUTAI Environmental Protection Co., Ltd.

PUTAI Group was founded in August 2008 and placed on the stock market in November 2016 with stock number 839410. Its main business is R&D, manufacturing, sales and integrated services about chemicals for wastewater treatment and drinking water purification.

The firm has two manufacturing sites with a total area of 30,000m2 and 100,000m2. This alumina powder is not the one which has the yearly capacity of 200,000 tonnes mentioned above. This is its high efficiency water treatment chemicals.

FAQ

Q1: What is the purity and crystal form?

A: It is 99.99% (4N) pure and in the α-phase crystal form.

Q2: How it works on ceramics?

A: It functions as a sintering aid to fill the gaps between the micron particles and as a toughening phase to enhance the mechanical performance.

Q3: Is it only for ceramic tiles?

A: No. Our product This powder is also used as a thermal and wear resistant filler in plastics and rubber.

Q4: How can I avoid clustering while mixing?

A: Add powder slowly, use high shear dispersion (e.g., bead mill or ultrasonic equipment). Trial batches do the correct loading.

Q5: What is the effect on the viscosity of plastics?

A: It can be loaded more easily than particles of a few dozen nanometres, without significantly increasing the viscosity, with a size of 150–300 nm. Still, watch viscosity as loading rises.

Q6: What health precautions are there?

A: Fine granules may irritate the respiratory tract. Handle with local exhaust ventilation and use a dust mask.

Contact Us

Do you have more questions about 99.99% (4N) Alpha Nano Alumina Powder for Ceramics? Send your application, target specifications and expected volume to sales@ywputai.com.

product-1-1

 

Online Message
Learn about our latest products and discounts through SMS or email