Nano alumina dispersion liquid (gamma phase)
Crystal form: γ-phase
Particle size: 10 nm / 20 nm
Concentration: 20%
pH value: 8–10
Solvent: Water
Product application: Paints and coatings
- Product Description
Nano Alumina Dispersion Liquid (Gamma Phase) for Paints and Coatings: 10 nm / 20 nm Water-Based Dispersion
Waterborne paint and coating formulators need a stable ingredient in water at the nanoscale. Xi'an PUTAI Environmental Protection Co., Ltd. Nano alumina dispersion liquid (gamma phase) is a milky white water-based liquid, in γ-phase crystal, with concentration of 20%. It is available in 10 nm and 20 nm particle sizes. pH value: 8–10, solvent: water. It is meant for paints and coatings where transparent, sticky films are important. Our experts will assist you choose a particle size for your system.
Nano Alumina Dispersion Liquid (gamma phase) Specifications
The table below lists the data supplied for this product.
| Parameter | Specification |
|---|---|
| Product type | Gamma alumina dispersion |
| Appearance | Milky white liquid |
| Crystal form | γ-phase |
| Particle size | 10 nm / 20 nm |
| Concentration | 20% |
| pH value | 8–10 |
| Solvent | Water |
| Application | Paints and coatings |
| Model | Apperance | Crystal form | Partical size (nm) | Purity % | pH | Solvent | Application |
YW-L10W | Translucent liquid | γ phase | 10 | 20 | 8-10 | water | coating |
YW-L20W | Milky white liquid | γ phase | 20 | 20 | 8-10 | water | coating |
Other data, such as viscosity, density, purity, packaging, shelf life and storage conditions, is not listed in the supplied specifications. Please contact us to confirm these values before you place an order.
Choosing Between 10 nm and 20 nm
Available in both particle size. As a matter of thumb, smaller particles scatter less light, hence the 10 nm grade is the more probable option for transparent or light-colored coatings. The 20 nm grade may be appropriate for those compositions where ease of handling is desired. The proper grade will depend on your binder, additives and film needs thus a little trial is the best way to determine. If you submit a query, tell us your desired clarity.
Key Features
- Two particle sizes: evaluate clarity vs handling in your own system with 10 nm and 20 nm possibilities.
- Water as solvent: The dispersion is intended for water based systems. Please validate the VOC values of your whole formulation.
- γ-alumina: The surface activity of γ-phase alumina is normally correlated with adhesion and compactness of the film. Check the impact on your own coating.
- Liquid format The substance is dispensed as a dispersion so you do not need to scatter dry nano-powder manually.
Applications in Paints and Coatings
This Nano alumina dispersion liquid (gamma phase) is suitable for waterborne paints and coatings requiring a clear or light-colored film. If you want the best transparency, then go with the 10 nm grade. If handling is the biggest issue, then consider the 20 nm grade. The data provided does not include the use of paints and coatings outdoors, please contact us to discuss your approach.
Formulation and Testing Notes
Try a brief compatibility test on your formulation before scale-up using the product. The pH of the dispersion is 8–10, and colloidal alumina may be subject to pH fluctuation. Flocculation or gelation may be caused by very acidic additions or unsuitable binders.
When you make the dose calculation write the 20% concentration and pH range so the trial batches are easier to compare. Begin with thin sheets, since a heavy coating of dried alumina might shatter. We do neither recommend dose nor maximum film thickness here, please approach our staff for help.
Before You Order
If you are looking for Nano alumina dispersion liquid (gamma phase), please provide the following information:
- Target particle size: 10 nm or 20 nm
- Binder system type and coating
- Film thickness and clarity requirements
- Anticipated volume
We’ll walk you through these points. Please also request us to validate the packaging, storage conditions, shelf life and papers accessible.
About Xi'an PUTAI
Xi'an PUTAI Environmental Protection Co., Ltd. was founded in August 2008 and floated in November 2016 with stock number 839410. The firm has more than 16 years experience in water treatment chemicals, and is engaged in the research, manufacturing, sales and services of chemicals for wastewater treatment and drinking water purification.
Total investment is 400 million RMB. The firm has production bases of 30,000 m2 and 100,000 m2, and its new 2.0 project supports an annual capacity of 200,000 tonnes of water treatment chemicals. It provides coagulants and other water treatment chemicals to Northwest China.
FAQ
Q: What particle sizes are available?
A: The dispersion is available in 10 nm and 20 nm.
Q: And the pH value? What is the concentration?
A: The concentration is 20% and the pH value is 8-10.
Q: Does the dispersion respond to pH change?
A: Alumina colloidal may be. Acidic additives or binders that are not suitable may induce flocculation or gelation. Test a small batch.
Q: What grade should I use for a clear coating?
A: In general the smaller the particle the less light it scatters . So the most probable beginning point is 10 nm . Tell us what kind of coating you are after and what clarity you want and we will assist you choose a grade.
Q: What are the storage conditions, shelf life and packaging sizes?
A: No information are provided in the specified specs. Please call to confirm them.
Contact Us
Email sales@ywputai.com with your target particle size, coating type and volume to request specifications or a quote for Nano alumina dispersion liquid (gamma phase).
