Mixed-Phase (Alpha-Gamma) Nano Alumina Powder for Refractory Materials
2. Specific surface area: 50 m²/g
3. Crystal form: Mixed crystal
4. Particle size: 30 nm
5. Product application: Refractory materials
- Product Description
Mixed-Phase (Alpha-Gamma) Nano Alumina Powder for Refractory Materials: 99.99% Purity, 30 nm
With a 30 nm particle size and a 50 m2/g specific surface area, Xi'an PUTAI Environmental Protection Co., Ltd. provides Mixed-Phase (Alpha-Gamma) Nano Alumina Powder for Refractory Materials. The powder is a mixture of alpha alumina and gamma alumina in a mixed-crystal" The alpha phase gives structural stability and strength at high temperature. The gamma phase is more reactive and encourages sintering at lower temperatures. Suitable for castables, monolithic refractories and fine matrix systems, but should be verified by experiments in your formulation.
Mixed-Phase (Alpha-Gamma) Nano Alumina Powder for Refractory Materials Specifications
The table below lists the specifications provided for Mixed-Phase (Alpha-Gamma) Nano Alumina Powder for Refractory Materials.
| Parameter | Specification |
|---|---|
| Product type | Nano alumina powder |
| Purity | 99.99% |
| Specific surface area | 50 m²/g |
| Crystal form | Mixed crystal (alpha phase + gamma phase) |
| Particle size | 30 nm |
| Application | Refractory materials |
| Model | Appearance | Crystalline | Partical size (nm) | Purity (%) | Specific area (m2/g) | Application |
YW-L20M | white powder | mixed-phase | 10-20nm | 99.99 | 110 | anti-caking agent for powder coatings |
YW-L30M | white powder | mixed-phase | 30nm | 99.99 | 50 | refractory material |
Parameters not listed above, such as the alpha-to-gamma ratio, impurity breakdown, bulk density, or packaging details, are not specified in the product data. Contact us to confirm what documents are available for your order.
How the Alpha and Gamma Phases Work Together?
The dense stable form of alumina is alpha alumina. In a refractory matrix, the load bearing and high temperature strength maintenance is provided by the structural phase.
Gamma alumina is a transition phase and is highly reactive. During fire it may lead to solid-phase sintering and reaction at lower temperatures than would be possible with a solely alpha powder.
One additive containing both phases in one powder may assist an early densification and a later high temperature stability. The real balance relies on your aggregate, binder system and firing schedule therefore do experiments before committing to a formulation.
Where It Fits in Refractory Formulations?
Monolithic castables and fine matrix systems are best suited for Mixed-Phase (Alpha-Gamma) Nano Alumina Powder for Refractory Materials. The fine fraction has a large contact area because of its 30 nm particle size and 50 m²/g surface area, which may allow the ceramic bonding to commence earlier during fire.
The 99.99% purity is especially important in formulations where contaminants might impact hot performance. Check the impurity limitations of your own recipe and ask us for the data you need before you specify the powder.
The typical aims in these designs areslag corrosion resistance and creep resistance. The results are dependent upon the whole formulation thus assess the powder by your own trial data.
Formulation and Usage Notes
Nano powders need adequate dispersion. The way you mix and the kind of deflocculant you use will also effect how well the particles disperse in the castable. Start with a small test batch and modify from there.
Be cautious with basic aggregates like magnesia or doloma. Water-based mixtures may flocculate or gel if the pH changes. Test the mixing order before scaling up.
Green strength and dry-out behaviour are a function of the binder system as a whole. Verify in trial castings and then modify the drying time and any drying agents.
This product is a nano powder in dry form. It is not a colloidal alumina binder, which is a liquid dispersion that hardens via gelation. The two materials might have distinct functions in a formulation.
Batch Data for Quality Review
Typically, purchasing and QA teams cross-check incoming batches against a limited list of products. Tell us what your plant needs from these:
- Chemical purity: the 99.99% figure and whatever impurity restrictions you choose.
- Particle size: verification that the powder meets the 30 nm criterion.
- Specific surface area: verification of 50 m2/g value.
- Crystal form: confirmation of the alpha and gamma phases mixture and ratio of phases if your procedure is dependent on it.
Our staff will check which test documents are available for your request.
About PUTAI
PUTAI Group was founded in 2008. Xi'an PUTAI Environmental Protection Co., Ltd. is one of them. The company incorporates R&D, manufacturing, sales and associated services with two production bases of more than 30,000 m² and 100,000 m². Stock code: 839410) has been publicly listed since November 2016.
PUTAI is a leading manufacturer and supplier of coagulants and other water treatment chemicals in Northwest China, specialising in resource recycling and environmental protection.
Customization, Samples, and Packaging
Send us your aggregate type, binder system and target firing temperature and our experts will examine the request and suggest appropriate supply options. Inquiry confirm availability of sample, amount of order, method of packing and delivery conditions. Just let us know in your letter what package size and destination you want.
FAQ
Q: What is a solid solution?
A: This signifies that both alpha alumina and gamma alumina exist in the same powder.
Q: Why put alpha and gamma phases together?
A: Gamma phase is more reactive and may be sintered at lower temperatures . The alpha phase gives structural stability and strength at high temperature.
Q: What are the primary characteristics of the product?
A: Purity: 99.99% Particle size: 30 nm Specific surface area: 50 m2/g The crystal is a blend of alpha and gamma.
Q: Is it same as colloidal alumina binder?
A: Nope. This is a dry nanopowder. A colloidal binder is a liquid dispersion which gels. Try it out and see what role works best for your dish.
Q: Will it work with plain aggregates?
A: Magnesia or doloma, be careful. First test the deflocculant and sequence of mixing. A pH change might produce flocculation.
Q: How can I get a quote?
A: Send your formulation, target quantity and needed test data to sales@ywputai.com.
Contact Us
Do you have more questions about Mixed-Phase (Alpha-Gamma) Nano Alumina Powder for Refractory Materials? Send your formulation, target volume, and required test data to sales@ywputai.com.

RECOMMENDATIONS
VIEW MORENano alumina dispersion liquid (gamma phase)
VIEW MORENano alumina dispersion liquid (alpha phase)
VIEW MORE5N High-purity Alumina
VIEW MOREalumina sol for surface insulating coating
VIEW MOREsubmicron alumina dispersion liquid (alpha phase)
VIEW MOREAl2O3 (α phase) for thermal conductivity
VIEW MORE4N Al2O3 for Battery separator coating
VIEW MORE4N Al2O3 for wearproof coating

 Nano Alumina Powder for Refractory Materials_1794366068761.webp)
